05.0 Subscribe

The Subscribe method allows you to monitor extension for events such as:

Answer
Hangup
Dial
Connected
Ringing

The Subscribe uses a long poll method. After receiving a 'subscribe' request the server will wait up to "timeout" seconds for call 14.0 Events on the target extension(s).

The method will return as soon as any events occurs on one of the target extensions or when the timeout occurs.

Note:

To guarantee that you don't miss any events between calls to subscribe you use the 'seq' data returned by a call to subscribe as the value of lastSequenceNumber in the next call to subscribe.

This method can immediately return the current state of all requested extensions, use timeout=0 and lastSequenceNumber=0. There is actually a minimum poll period of around 100ms.

A single subscribe method will often return multiple events.

Entry point:

NOTE: you must use the POST method, however you don't need to send any data.

https://<server host>/servicemanager/rest/CallManagementAPI/subscribe

HTTP Method: POST

Content Type: application/x-www-form-urlencoded

Parameters (case sensitive):

Argument	Description	Mandatory

Argument	Description	Mandatory
exten	a comma-separated list of extensions to monitor for calls.	Yes
lastSequenceNumber	The client should retrieve this number from the CallData.seq value in the API response. The first call you make to subscribe should set this value to 0. Subsequent MUST use the lastSequenceNumber returned in the CallData.seq. NOTE: If you to pass back the lastSequenceNumber obtained from the CallData.seq then you will either receive duplicate events or you will miss events.	Yes
timeOut	the poll timeout in seconds - default is 10 if this parameter is omitted.	No
apiKey	api key provided by Noojee Support	Yes

This API call returns a CallData resource containing the information needed to correctly handle any call.

The following is an example using the curl command:

curl -X POST "https://<some hostname>/servicemanager/rest/CallManagementAPI/subscribe?timeOut=0&apiKey=XXXX-XXXXX-XXXXX-XXXXX&lastSequenceNumber=0&instanceId=1&exten=400,410,410"

Examples:

Sample response when two calls are received from 400 at extension 410. The first call arrives and the API returns, then the second call arrives and the API returns the information about the second call only. Both of the calls are rejected simultaneously and the final response contains a Data resource with a collection of Extension resources (e.g. 400 in the sampe below). Each Extension resource contains an array of CallData resources. The associated uniqueCallId is used to answer a call (see below).

https://<server hostname>/servicemanager/rest/CallManagementAPI/subscribe?timeOut=60&
apiKey=f863246a-973e-11e6-8784-08002718f5b5&lastSequenceNumber=28&instanceId=1&exten=400,410,410

{"Data":{ 
"410":[{"CallData":{     
    "canAnswer":true,     
    "callerId":"400",     
    "uniqueCallId":"1412750652.496",     
    "callStartTime":"",     
    "isQueueCall":false,     
    "isClickToDialCall":false,     
    "inbound":true,     
    "status":"Ringing"},"CallID":10,"Code":0}], 
"400":[{"CallData":{     
    "canAnswer":false,     
    "callerId":"",     
    "uniqueCallId":"1412750656.497",     
    "callStartTime":"",     
    "isQueueCall":false,     
    "isClickToDialCall":false,     
    "inbound":false,     
    "status":"Dialing Out"},"CallID":9,"Code":0}]},"seq":32,"Code":0}

https://<server hostname>/servicemanager/rest/CallManagementAPI/subscribe?timeOut=60
&apiKey=f863246a-973e-11e6-8784-08002718f5b5&lastSequenceNumber=32&instanceId=1&exten=400,410,410

{"Data":{ 
"410":[{"CallData":{     
    "canAnswer":true,     
    "callerId":"400",     
    "uniqueCallId":"1412750658.498",     
    "callStartTime":"",     
    "isQueueCall":false,         
    "isClickToDialCall":false,     
    "inbound":true,     
    "status":"Ringing"},"CallID":12,"Code":0}], 
"400":[{"CallData":{     
    "canAnswer":false,     
    "callerId":"",     
    "uniqueCallId":"1412750661.499",     
    "callStartTime":"",     
    "isQueueCall":false,     
    "isClickToDialCall":false,     
    "inbound":false,     
    "status":"Dialing Out"},"CallID":11,"Code":0}]},"seq":36,"Code":0}

http://<server hostname>/servicemanager/rest/CallManagementAPI/subscribe?timeOut=60&
apiKey=f863246a-973e-11e6-8784-08002718f5b5&lastSequenceNumber=36&instanceId=1&exten=400,410,410

{"Data":{ 
"410":[{"CallData":{     
    "canAnswer":false,     
    "callerId":"400",     
    "uniqueCallId":"1412750652.496",     
    "callStartTime":"",     
    "isQueueCall":false,     
    "isClickToDialCall":false,     
    "inbound":true,     
    "status":"Hungup",     
    "hangupCause":"NO_ANSWER"},"CallID":10,"Code":0}, 
{"CallData":{     
    "canAnswer":false,     
    "callerId":"400",     
    "uniqueCallId":"1412750658.498",     
    "callStartTime":"",     
    "isQueueCall":false,     
    "isClickToDialCall":false,     
    "inbound":true,     
    "status":"Hungup",     
    "hangupCause":"NO_ANSWER"},"CallID":12,"Code":0}], 
"400":[{"CallData":{     
    "canAnswer":false,     
    "callerId":"410",     
    "uniqueCallId":"1412750656.497",     
    "callStartTime":"",     
    "isQueueCall":false,     
    "isClickToDialCall":false,     
    "inbound":false,     
    "status":"Hungup",     
    "hangupCause":"NO_ANSWER"},"CallID":9,"Code":0}, 
{"CallData":{     
    "canAnswer":false,     
    "callerId":"410",     
    "uniqueCallId":"1412750661.499",     
    "callStartTime":"",     
    "isQueueCall":false,     
    "isClickToDialCall":false,     
    "inbound":false,     
    "status":"Hungup",     
    "hangupCause":"NO_ANSWER"},"CallID":11,"Code":0}]},"seq":40,"Code":0}

To answer the first call listed in the sample above use the uniqueCallId and pass it in as the uniqueId to the answer method:

answer?answerString=...&apiKey=....&exten=101&uniqueId=1403148776.566

The CallData values are defined as follows:

canAnswer	true if an incoming call has been detected, is not yet answered and is not from a queue, false otherwise.
callerId	the caller ID incoming or outgoing call
seq	the sequence number of the subscribe call. This number is used to determine which calls should be shown in the response. To get the current state of all calls always use 0, other wise only calls where the status has changed since "seq" will be retrieved.
uniqueCallId	an internal unique ID for the call. Use this ID in the call to 06.0 Answer.
isQueueCall	true if the call is received through a queue, false otherwise
isClickToDialCall	true if the call was initaited by Click-to-Dial; false otherwise.
inbound	true if an inbound call is detected; false otherwise.
status	the status of the monitored handset - one of: Dialing Out, Connected, Ringing or Hungup
hangupCause	If the call didn't connect and is Hungup, the cause will be one of DISCONNECTED, NO_ANSWER, CONGESTION or BUSY

Sample API call sequence - one extension answered multiple times:

Call 1: Extension 400 dials extension 410, then the call is answered and finally hungup.

https://<server hostname>/servicemanager/rest/CallManagementAPI/subscribe?timeOut=60&
apiKey=f863246a-973e-11e6-8784-08002718f5b5&lastSequenceNumber=0&instanceId=1&exten=400,410,410

"410": [{"CallData":{
     "canAnswer":true,
     "callerId":"400",
     "uniqueCallId":"1412749510.488",
     "callStartTime":"",
     "isQueueCall":false,
     "isClickToDialCall":false,
     "inbound":true,
     "status":"Ringing"},"CallID":2,"Code":0}], 
"400": [{"CallData":{     
    "canAnswer":false,     
    "callerId":"",     
    "uniqueCallId":"1412749517.489",     
    "callStartTime":"",     
    "isQueueCall":false,     
    "isClickToDialCall":false,     
    "inbound":false,     
    "status":"Dialing Out"} ,"CallID":1,"Code":0}]},"seq":4,"Code":0}

https://<server hostname>/servicemanager/rest/CallManagementAPI/subscribe?timeOut=60&
apiKey=f863246a-973e-11e6-8784-08002718f5b5lastSequenceNumber=4&instanceId=1&exten=400,410,410

{"Data":{ 
"410": [{"CallData":{
     "canAnswer":false,     
     "callerId":"400",     
     "uniqueCallId":"1412749510.488",     
     "callStartTime":"2014/10/08 17:25:18",     
     "isQueueCall":false,     
     "isClickToDialCall":false,     
     "inbound":true,     
     "status":"Connected"},"CallID":2,"Code":0}], 
"400": [{"CallData":{     
    "canAnswer":false,     
    "callerId":"410",     
    "uniqueCallId":"1412749517.489",     
    "callStartTime":"2014/10/08 17:25:18",     
    "isQueueCall":false,     
    "isClickToDialCall":false,     
    "inbound":false,     
    "status":"Connected"},"CallID":1,"Code":0}]},"seq":6,"Code":0}

https://<server hostname>/servicemanager/rest/CallManagementAPI/subscribe?timeOut=60&
apiKey=f863246a-973e-11e6-8784-08002718f5b5&lastSequenceNumber=6&instanceId=1&exten=400,410,410

{"Data":{ 
"410": [{"CallData":{     
    "canAnswer":false,     
    "callerId":"400",     
    "uniqueCallId":"1412749510.488",     
    "callStartTime":"2014/10/08 17:25:18",     
    "isQueueCall":false,     
    "isClickToDialCall":false,     
    "inbound":true,     
    "status":"Hungup"},"CallID":2,"Code":0}], 
"400": [{"CallData":{     
    "canAnswer":false,     
    "callerId":"410",     
    "uniqueCallId":"1412749517.489",     
    "callStartTime":"2014/10/08 17:25:18",     
    "isQueueCall":false,     
    "isClickToDialCall":false,     
    "inbound":false,     
    "status":"Hungup"},"CallID":1,"Code":0}]},"seq":10,"Code":0}

Call 2: Extension 400 dials extension 410, 410 is busy.

https://<server hostname>/servicemanager/rest/CallManagementAPI/subscribe?timeOut=60&
apiKey=f863246a-973e-11e6-8784-08002718f5b5&lastSequenceNumber=10&instanceId=1&exten=400,410,410

{"Data":{
"410":[{"CallData":{
    "canAnswer":true,
    "callerId":"400",
    "uniqueCallId":"1412749905.490",
    "callStartTime":"",
    "isQueueCall":false,
    "isClickToDialCall":false,
    "inbound":true,
    "status":"Ringing"},"CallID":4,"Code":0}],
"400":[{"CallData":{
    "canAnswer":false,
    "callerId":"",
    "uniqueCallId":"1412749908.491",
    "callStartTime":"",
    "isQueueCall":false,
    "isClickToDialCall":false,
    "inbound":false,
    "status":"Dialing Out"},"CallID":3,"Code":0}]},"seq":14,"Code":0}

https://<server hostname>/servicemanager/rest/CallManagementAPI/subscribe?timeOut=60&
apiKey=f863246a-973e-11e6-8784-08002718f5b5&lastSequenceNumber=14&instanceId=1&exten=400,410,410

{"Data":{
"410":[{"CallData":{
    "canAnswer":false,
    "callerId":"400",
    "uniqueCallId":"1412749905.490",
    "callStartTime":"",
    "isQueueCall":false,
    "isClickToDialCall":false,
    "inbound":true,
    "status":"Hungup",
    "hangupCause":"BUSY"},"CallID":4,"Code":0}],
"400":[{"CallData":{
    "canAnswer":false,
    "callerId":"410",
    "uniqueCallId":"1412749908.491",
    "callStartTime":"",
    "isQueueCall":false,
    "isClickToDialCall":false,
    "inbound":false,
    "status":"Hungup",
    "hangupCause":"BUSY"},"CallID":3,"Code":0}]},"seq":16,"Code":0}