Asterisk

Owned by PeterF (Deactivated)
Sept 06, 2016

Server Type

Selects the method that Noojee Click will use to communicate with your Asterisk Server. AJAM (the http server built into Asterisk 1.4 and above) is now the recommended server type.

For Asterisk 1.6 you need to use Asterisk 1.6.0.6 or above.

Astmanproxy support will be deprecated in a future release and has only had minimal testing in this release.

Host

Host name or IP address of your Asterisk server.

Port

Asterisk HTTP server (AJAM) port. [as per /etc/asterisk/http.conf]

Username

Asterisk Manager API username. [as per /etc/asterisk/manager.conf]

Password

Asterisk Manager API secret which corresponds to the above username.

Context

Dialplan context that calls should be sent through.

Use HTTPS

If selected then communications with your Asterisk server will be via HTTPS rather than HTTP.

Use this if you are connecting over an insecure network. Check the Noojee forums for additional configuration information.

Note: you need to configure the Asterisk http.conf to enable HTTPS.